【產品介紹】
適配器外觀平滑、潔凈、無油污及毛刺，無傷痕和裂痕
Appearance of adapter must be smooth and clean. It has no oil, burrs, scars and crack；
適配器外觀顏色鮮明、一致性好
The color of adapter must be bright in good consistency；
各零部件組合須平整，插頭與適配器的插入和拔出須平順、輕松、卡子有力；
All parts of adapter can assembly well without difficulty, it should be easy and
comfortable to plug in and pull out connector from adapters, the clip should be powerful.
模式：?jiǎn)文?/span>
Modes：SM ；
高精密陶瓷套管；
sleeve in high precision；
所有材料滿足 RoHS 要求；
all material meets RoHS
低插入損耗；low insertion loss
重復性好； good repeatability
互換性好；good interchangeability
安裝方便； Easy installation
溫度穩定性好；good temperature stability
光纖通信系統；Optical fiber communication system
有線電視網絡(luò )；cable television network
局域網,廣域網；LAN,WAN
光纖接入網；Optical fiber access network
視頻傳輸；video transmission
測試設備；test equipment
|
項目 Project |
指標 Values |
||
|
參照標準 Reference standard |
YD/T 1272.1-2003 |
||
|
插入損耗 Insertion loss |
≤0.2dB |
||
|
各種試驗后的插損變化量 IL change absolute value |
低溫 low temperature |
溫度：-40℃ 時間：168小時 Temperature: -40℃ Duration: 168 h |
≤0.2dB |
|
高 溫 high temperature |
溫度：85℃ 時間：168小時 Temperature: 85℃ Duration: 168 h Temperature change rate: 1℃/min |
≤0.2dB |
|
|
濕 熱 Hot and humid |
溫度：40℃ 溫度：90%~95% 時間：168小時 Temperature: 40℃ Humidity: 90%~95% Duration: 168h Temperature change rate: 1℃/min |
≤0.2dB |
|
|
溫度循環 Temperature cycle
|
溫度：-40℃ to + 85℃ 時間：168小時 循環次數：21次 Temperature: -40℃ to + 85℃ Duration: 168h Cycle times:21 Temperature change rate: 1℃/min |
≤0.2dB |
|
|
重復性 repeatability |
重復插拔10次 Insertion pull times:10 |
≤0.2dB |
|
|
機械耐久性 Mechanism durability |
插拔次數：500次 Insertion times: 500 cycles |
≤0.2dB |
|
|
鎖緊機構抗拉強度 Tensile strength Of coupling mechanism |
68.6N/10 Minute |
≤0.2dB |
|
|
部件名稱 parts Name |
數量 Qty |
材質 Requirement |
|
外殼 Body(housing) |
1 |
PC |
|
內襯 Lining |
2 |
PES |
|
防塵帽 Dust cap |
2 |
TPV |
|
套管 Sleeve |
2 |
Zirconia Ceramic |
|
彈片 Spring |
1 |
SUS304 |
